The Super E and G are butterfly type carbs with fully adjustable idle mixture screws and changeable intermediate and main jets. The idle mixture screw is positioned and angled for easy accessibility. Even with five gallon gas tanks, adjustments are not a problem. All Super series carburetors use a special enrichment device instead of a choke for starting. This leaves the bore of the carburetor unobstructed for greater air flow. The enrichment device on the Super E & G carbs is activated by a variable position lever attached to the air cleaner backplate. By simply adjusting the lever, starting and warm-ups are made easy and foolproof.
The Super E has a 1-7/8" throat at the butterfly and is identified by an "E" cast into the throttle linkage side of the carb body below the cast in wording "S&S SUPER". The Super G has a 2-1/16" throat at the butterfly and is identified by an "G" cast into the throttle linkage side of the carb body below the cast in wording "S&S SUPER". Throttle spool assembly is designed to accept stock 1981 and later style two-cable pull open-pull closed throttle assemblies so stock throttle cables can be used. Made in USA.
Fitment: Super E, 1-7/8" Bore